
Think Outside of the bale. It’s the cost on the Ground… Not in the Bale that Counts
8 QUESTIONS THAT WILL
LEAD YOU TO PROFIT
Fill in your information below and click ‘View Results’ for your results
Project Size(1)
Acres
HydroSeeder Working Capacity(2)
Gallons
Load Time(3)
Minutes
Application Time(4)
Minutes
Travel Time For Water(5)
Minutes
Standard Two Step Process
Application Rates(6)
Hydraulic Growth Medium
Lbs/Acre
Wood BFM(7)
Lbs/Acre
VS
One Step Process
Application Rate(8)
All In 1 BFM
Lbs/Acre
One Step Application Rate delivers:
lbs / Acre Soil Amendments / Fertilizer
lbs / Acre BFM
(1)Project Size is based on total Acres receiving mulch
(2)HydroSeeder Working Capacity is how many gallons of water it takes to fill
your tank
(3)Load Time is based on how long it takes to fill your tank with
water, mulch, seed, and fertilizer.
HydroStraw All In 1 Bonded Fiber Matrix bales load faster than wood bales
allowing you to add more mulch in the same amount of time
(4)Application Time is the amount of time it takes to spray your
entire tank
(5)Travel Time For Water includes the amount of time to travel
from your job site to your water source, and then
back to your job site. Do not include the time it takes to
fill your tank
(6)Application Rate is determined by how many pounds are applied per Acre of Hydraulic Growth Medium
(7)Application Rate is determined by how many pounds are applied per Acre of Wood BFM
(8)Application Rate is determined by how many pounds are applied per Acre of HydroStraw All In 1
Time Savings
Hydraulic
Growth Medium
Required for Step 1
2000.0 Bales,
50.0 Tons
HYDROSEEDER LOADS REQUIRED
TOWER RATE FOR:
75LBS/100 GAL WATER LOADING RATE
75LBS/100 GAL WATER LOADING RATE
44.4
Tank Loads
45.0
Bales / Hydroseeder Tank
VS
HydroStraw All In 1
Bonded Fiber Matrix
Required for Project
2000.0 Bales,
50.0 Tons
HYDROSEEDER LOADS REQUIRED
TOWER RATE FOR:
100LBS/100 GAL WATER LOADING RATE
100LBS/100 GAL WATER LOADING RATE
33.3
Tank Loads
60.0
Bales/ Hydroseeder Tank
Wood Bonded
Fiber Mulch
Required for Step 2
1875.0 Bales,
46.9 Tons
HYDROSEEDER LOADS REQUIRED
TOWER RATE FOR:
40LBS/100 GAL WATER LOADING RATE
40LBS/100 GAL WATER LOADING RATE
78.1
Tank Loads
24.0
Bales / Hydroseeder Tank
VS
No Step 2 Required
Time Required For Project
Two Step Process | All In 1 BFM – One Step Process | ||
Loading Time | Minutes | ||
Application Time | Minutes | ||
Travel Time | Minutes | ||
Total | Minutes | ||
Total 8 hour days | Days |
How much is 1.4 days worth to you?
Water Savings
Two Step Process
175,000
Gal. of Water Required
VS
All In 1 BFM
One Step Process
150,000
Gal. of Water Required
0 Gallons Saved
Biological Nutrient Package at rate of 5000 lbs / Acre delivers:
50 Units Nitrogen / Acre 50 Units Phosphorus / Acre 50 Units Potassium / Acre |
This natural fertilizer feeds the newly developing plants and the beneficial bacteria. |
Mycorhizae Fungi | In severely disturbed soils mycorrhizal has likely been destroyed. Adding Mycorrhizae improves symbiotic relationship between the fungus and the plant. This increases plant growth, improved fitness, and increased root absorption area of nutrients. |
Beneficial Bacteria | Beneficial bacteria, soil microorganisms, designed to restore the native microbial population in the soil, which enhances the natural organic processes that occur in nature’s ecosystem evolution. |
Wheat Straw | Hydro Straw’s patented wheat straw processing allows us to provide a porous mulch matrix thus allowing maximum water infiltration into the soil. The porosity of our matrix allows newly germinating plants to penetrate the matrix resulting in increased erosion control benefits. Hydro Straws wheat straw is an ideal home for the initial beneficial bacteria and later a valuable food source for the microbes and the developing vegetation. |
Example Fertilizer Rates Delivered Per Acre
Mulch Lbs. / Acre | Nutrients Delivered / Acre |
---|---|
4,000 lbs/ac | N (40lbs) P2O5 (40lbs) K2O (40lbs) |
5,000 lbs/ac | N (50lbs) P2O5 (50lbs) K2O (50lbs) |
6,000 lbs/ac | N (60lbs) P2O5 (60lbs) K2O (60lbs) |